To start a rice mill in India you need a shed with a firm floor, three-phase power, a set of milling machines (sheller, separator, whitener and polisher), a weighbridge or scale, working capital for paddy, and about ₹10–20 lakh for a small mill or ₹30–50 lakh for a larger one. The trade is high in volume and thin in margin, so what the mill saves on breakage, power and time is what you take home.
All figures here are estimates. Check prices near you before you spend.
What does it cost?
| Item | Small mill | Larger mill |
|---|---|---|
| Milling machines: sheller, separator, whitener, polisher | ₹4–8 lakh | ₹10–20 lakh |
| Elevators, hoppers, pipework | ₹1–2 lakh | ₹3–6 lakh |
| Shed and flooring | ₹3–5 lakh | ₹6–12 lakh |
| Power connection, transformer, panel | ₹1.5–3 lakh | ₹3–6 lakh |
| Weighbridge or platform scale | ₹50,000–1 lakh | ₹3–4 lakh |
| Paddy stock (working capital) | ₹3–6 lakh | ₹10–20 lakh |
| Bags, loading and small equipment | ₹50,000–1 lakh | ₹2–3 lakh |
| Licences and set-up | ₹50,000–1 lakh | ₹1–2 lakh |
| Total | about ₹10–20 lakh | about ₹30–50 lakh |
A boiler and dryer for parboiling can add another large sum. Ask makers for a demo with your local paddy and check the breakage on the sample.
What does a rice mill earn from?
- Rice: the main product, sold in 25 or 50 kg bags to wholesalers, shops and institutions.
- Broken rice: sold at a lower price, so each percent of breakage costs you.
- Bran: sold to oil extractors or feed makers.
- Husk: sold as fuel or fodder bedding, and sometimes burnt for the mill's own use.
- Job milling: farmers and traders pay a charge per quintal to have their paddy milled.
Most small mills mix job milling with some own-paddy trading, because buying paddy ties up a great deal of money.
How much can it earn?
Here is a small mill that mills 100 tonnes of paddy a month and sells its own rice.
Sales
- Rice: about 66% of 1,00,000 kg = 66,000 kg × ₹36 = ₹23,76,000
- Bran: 6,000 kg × ₹20 = ₹1,20,000
- Husk: 20,000 kg × ₹3 = ₹60,000
- Total = ₹25,56,000
Costs each month
- Paddy: 1,00,000 kg × ₹22 = ₹22,00,000
- Power: ₹70,000
- Six workers × ₹14,000: ₹84,000
- Bags: ₹27,000
- Loading and transport: ₹40,000
- Interest on working capital: ₹40,000
- Repairs and spares: ₹20,000
- Total = ₹24,81,000
Left over: ₹25,56,000 − ₹24,81,000 = about ₹75,000 a month.
That is about 3% of sales, which is normal for the trade. A change of ₹1 a kilo in the buying price or the rice price can swing the whole month. If you do job milling only, your risk is lower, but the monthly earning is also lower.
What do you need before you start?
- A reliable paddy supply from farmers or the mandi, and a plan for the months when paddy is scarce.
- Three-phase power at a steady voltage. Rice mills draw a heavy load.
- A site on a road a truck can use, and room for trucks to wait and turn.
- A plan for dust and husk, because it blows into neighbouring houses.
- Working capital. Paddy is the big cost, so many mills use a bank cash credit limit.
Step by step
- Visit two or three working mills of your size and ask what rice they get from a quintal of paddy, how much breaks and what they earn from job work.
- Choose your land and check the permissions before buying machines.
- Apply for the power connection early, since it can take time.
- Install machines with a trained fitter and run trial lots with your local paddy.
- Set a house standard for rice: whiteness, breakage and moisture. Test every lot, and keep a sample.
- Fix your job-milling charge and display it so farmers know the rate.
- Find buyers for bran and husk before they pile up.
Which licences apply?
- FSSAI registration or licence for the rice you sell.
- Registration of the unit with the local industries office, and an Udyam registration for loans and schemes.
- Power approval for your load.
- Pollution board consent is often needed because of dust and husk. Ask your state office.
- Factory and labour rules depend on the number of workers. Ask the labour office.
- Weights and measures: weighbridges and scales usually need checking and stamping.
- Government milling work: some states let mills mill paddy for government agencies. Ask your state civil supplies department about terms.
- GST: ask a CA.
What goes wrong?
- Breakage. Wet or badly dried paddy cracks in the machine and turns into cheap broken rice.
- Paddy price swings, especially after procurement season ends.
- Power cuts and voltage drops that stall the line and burn motors.
- Buying paddy on credit and selling rice on credit. Cash gets stuck at both ends.
- Husk and bran piling up, which attracts rats and complaints.
- Mixed varieties in one lot, which makes the rice look uneven and fetches a lower price.
Situations you will face
What would you do? Each choice costs something.
Getting started
A huller costs little but breaks a lot of rice. A sheller with whitener and polisher costs several times more.
- Buy the modern line: Costly, less breakage
- Start with the huller: Cheaper, more broken rice
Land inside the village is cheap but trucks cannot turn. A plot on the highway costs much more.
- Buy the highway plot: Costly, easy trucking
- Buy the village plot: Cheaper, hard truck access
The power office says your load needs a transformer and that may take months. A diesel set could run the mill meanwhile.
- Rent a diesel set: High fuel cost, start sooner
- Wait for the transformer: No cost, idle machines
Farmers offer paddy now at a fair rate but want cash on delivery. A trader offers credit at a higher price.
- Buy direct for cash: Better price, cash tied up
- Buy from the trader on credit: Cash free, dearer paddy
Husk dust is blowing towards houses. The pollution board's consent needs a dust arrangement.
- Fit dust collectors, apply: Costly, a clean file
- Apply and delay the fitting: Saves money, complaint risk
A bank will give working capital if you show stock records and insurance. Interest runs every month.
- Take the cash credit: Interest cost, more paddy
- Run on own money: No interest, small buying
First month
A farmer brings paddy with high moisture. Milling it will break a lot of grain.
- Dry it for two days first: Delay, less breakage
- Mill it at a lower rate: Quick, more broken rice
A wholesaler says one lot has too much broken rice. The polisher setting may be too tight.
- Call the fitter to reset: Visit cost, steady quality
- Sell the lot cheaper: Quick, a lasting loss
A farmer says the paddy weight does not match their own count. Others at the gate are watching.
- Re-weigh on a checked scale: Time lost, builds trust
- Close the matter by paying: Costs money, shows doubt
The bran store is full and trucks of paddy are waiting to unload. The oil extractor offers a low rate.
- Sell the bran cheap: Clears space, low price
- Build extra storage: Cost, better price later
Running it
A fast rise in paddy rates squeezes your margin. Your wholesalers have agreed on a rice rate.
- Ask for a higher rice rate: Margin holds, lose some buyers
- Hold the rate: Buyers stay, margin gone
A wholesaler will buy all your rice but pays after 45 days. Your paddy is paid in cash.
- Accept 45-day credit: A sure buyer, cash waits
- Sell in smaller lots for cash: Cash safe, slower sales
A farmers' group wants their paddy milled for a charge per quintal. It keeps machines busy but earns less than your own rice.
- Take job work in slack weeks: Steady charges, low risk
- Use all capacity for own rice: More upside, more risk
A brick kiln offers a steady price for husk. A boiler user nearby offers slightly more but wants delivery.
- Sell to the kiln: Easy, lower price
- Deliver to the boiler user: Truck cost, better price
Rats have torn some bags and weevils are in a paddy stack. A pest service is costly.
- Hire pest control, restack: Costly, safe stock
- Use traps and fresh bags: Cheaper, risk remains
A buyer wants aromatic rice with less than a set limit of broken grains. Your line is set for common paddy.
- Fine-tune the line, take a lot: Cost, a better price
- Decline, keep common rice: No cost, no premium
A feed maker and a snack maker both want your broken rice. One pays more but wants it cleaned and bagged.
- Clean, bag for snack maker: Labour, a better price
- Sell as is to feed maker: Easy, lower price
When things go wrong
A shaft bearing fails with trucks of paddy outside. The fitter says two days, and spares are in another town.
- Pay for urgent spares and repair: Costly, back in two days
- Wait for regular spares: Cheaper, a week lost
A low-voltage spell burns the sheller motor. The panel has no protection.
- Rewind and fit a protector: Cost, protected from now
- Rewind the motor only: Cheaper, risk remains
Families nearby complain about dust on their roofs. A panchayat member visits.
- Add a cyclone collector: Costly, cleaner air
- Plant trees, wet the yard: Cheap, partial help
A smoking husk heap is found at dawn. Workers put it out, but it was close to the godown.
- Move the heap, fit extinguishers: Cost, a safer yard
- Wet the heap and watch it: Cheap, risk remains
A cheque of ₹3 lakh from a wholesaler bounces, and they ask for another lot to settle all together.
- Stop supply until cleared: Safe, may lose the buyer
- Send a small lot: More at risk, buyer stays
A big buyer rejects a truck because grains look yellowed. The paddy was stored too long in a damp stack.
- Take it back, sell cheaper elsewhere: Loss, trust kept
- Sell it to a low-grade buyer: Bigger loss, clean name
Growing
A colour sorter removes discoloured grains and raises the rice price. It costs a lot.
- Install the colour sorter: Heavy cost, premium rice
- Hand-sort a premium lot: Cheap, slow and small
Wholesalers in another state want parboiled rice. A boiler, tanks and dryer cost a lot.
- Build the parboiling unit: Heavy cost, new market
- Stay with raw rice: No cost, one market
Shops will pay more for branded small bags than for 50 kg sacks. You would need a packing machine and printing.
- Start a branded line: Machine and print cost
- Keep selling in sacks: No cost, lower margin
An installer offers a rooftop system that cuts the power bill. It is a big spend and pays back slowly.
- Install rooftop solar: Big spend, lower bills later
- Shift heavy runs to off-peak: Small saving, free
Bran sells cheaply to others. A small bran oil unit would give more value but needs a licence and a trained team.
- Keep selling bran: No cost, low value
- Tie up with an oil extractor: Contract, a steadier price
Paddy supply is strong, but your line runs at its limit. A second line needs a shed extension and more working capital.
- Add the second line: Heavy cost, larger volume
- Improve the first line: Small spend, less breakage
A state agency invites mills for milling work with strict quality and papers. Payment is reliable but slow.
- Apply and meet the norms: Papers and cost, steady work
- Skip it, sell to the market: No cost, free hands
Is it right for you?
A rice mill suits you if you can manage working capital, deal with traders and farmers all day, and keep a close eye on machines and weights. It suits you less if you cannot afford to have a large sum tied up for months or have no family experience in grain trading.
A good test: spend a season at a working mill, record the paddy in, the rice out and the breakage, and talk to its bank. If you still see a margin after counting power and interest, start with job milling and grow into own-paddy trading.


