English
BlogPlay free

Carpenter business in India: how to start a carpentry workshop, cost and profit

How to start a carpenter business in India: tool and workshop cost, wardrobe and door work, a monthly profit example, licences and common mistakes.

BizGame editors · Updated 2026-11-02 · 6 min read
Carpentry & woodwork service business in India

Figures on this page are estimates. Check local prices and rules before you spend.

To start a carpenter business in India you need good hands, a set of power tools (circular saw, jigsaw, router, drill), clamps and measuring tools, one helper, and about ₹70,000–1.4 lakh to work on customers' sites, or ₹1.7–3.1 lakh for a small rented workshop with a table saw and planer. Carpentry is paid for finish. A wardrobe that closes smoothly, a door that fits the frame and a kitchen that stays straight after the monsoon get you the next job by word of mouth.

All figures here are estimates. Check prices near you before you spend.

What does it cost?

Item Site carpenter + helper Small workshop
Circular saw, jigsaw, drill, router ₹18,000–35,000 ₹25,000–45,000
Hand tools, clamps, measuring tools ₹12,000–25,000 ₹20,000–35,000
Table saw (basic) not yet ₹25,000–45,000
Planer or bandsaw not yet ₹15,000–35,000
Compressor and nailer ₹10,000–20,000 ₹12,000–25,000
Opening stock: screws, hinges, glue, polish ₹8,000–15,000 ₹15,000–30,000
Workshop deposit and wiring not needed ₹20,000–35,000
Cards, phone, photos of past work ₹3,000–6,000 ₹5,000–10,000
Cash for materials before payment arrives ₹20,000–40,000 ₹30,000–50,000
Total about ₹70,000–1.4 lakh about ₹1.7–3.1 lakh

You will also need a way to carry boards, such as a hired tempo for each job. Do not buy boards for every job in advance. Take a first payment that covers the materials, then buy.

What kind of work should you take?

  • Wardrobes and storage. The most common big job in flats. Measuring, hardware and finishing decide whether the customer is happy.
  • Kitchen cabinets. Need moisture-resistant boards, good hardware and careful sealing, because water kills cheap boards.
  • Doors and frames. Fit is everything. A frame that is out of square makes the door stick every monsoon.
  • Beds, tables, shelves, TV units. Made-to-order furniture where you can show a design in advance.
  • Repairs and polishing. Loose joints, broken drawers and worn polish. Not glamorous, but regular and good for trust.
  • Partitions and false ceilings in wood. Often come through interior designers, who are good repeat clients.

How much can it earn?

Take a rented workshop with you and two carpenters. In one month you finish 3 wardrobes at an average of ₹45,000, 6 doors and small furniture jobs at ₹10,000 each, and 15 repairs at ₹1,500 each.

Sales

  • 3 wardrobes × ₹45,000 = ₹1,35,000
  • 6 doors and furniture jobs × ₹10,000 = ₹60,000
  • 15 repairs × ₹1,500 = ₹22,500
  • Total = ₹2,17,500

Costs each month

  • Boards, hardware and polish for wardrobes: 3 × ₹22,000 = ₹66,000
  • Materials for doors and furniture: 6 × ₹5,500 = ₹33,000
  • Materials for repairs: 15 × ₹400 = ₹6,000
  • Two carpenters at ₹20,000 each = ₹40,000
  • Workshop rent = ₹12,000
  • Power = ₹4,000
  • Tempo and transport = ₹6,000
  • Blades, bits and small tools = ₹4,000
  • Ads and leads = ₹4,000
  • Small items = ₹3,000
  • Total = ₹1,78,000

Left over: ₹2,17,500 − ₹1,78,000 = about ₹39,500 a month, and you work on the jobs yourself.

Materials take about half of what you charge, so a mistake in cutting a ₹3,000 board eats into your day's profit. Customers also pay late, so ask for an advance of about half before you buy material.

What do you need before you start?

  • Skill that shows. Straight cuts, tight joints, even edges and clean finishing. Look at your own work in daylight before the customer does.
  • A written estimate. Size, board type, hardware brand, finish, price, payment schedule and finishing date. Disputes start when these are only spoken.
  • A dependable helper. One good helper who comes daily is better than three who come when they like.
  • A material supplier who gives credit or fair rates. Keep two suppliers so you are never stuck.

Step by step

  1. Work for a good carpenter or workshop for a year or two. Learn how they measure, how they fit hardware and how they quote.
  2. Buy the basic power tools and good clamps. A router and a circular saw with a guide give clean edges.
  3. Make a small portfolio from free or cheap work for friends and family. Photograph the finished work in daylight.
  4. Approach interior designers, builders and flat owners. Interior designers can give a steady stream of work for the right price and finish.
  5. Write every estimate with board type, hardware brand and finish. Take about half as an advance.
  6. Visit the site yourself before you quote. Check wall levels, floor level and electrical points.
  7. Add a table saw and a workshop only when you cannot keep up with on-site work or when orders need accurate cutting.

Which licences apply?

  • Shop or trade registration for a workshop with a signboard and staff. Rules vary by state.
  • GST. Ask a CA about registration, especially if you supply material and labour.
  • Electricity. A workshop with machines usually needs a commercial connection. A home meter may not allow it.
  • Timber. Solid timber, such as teak, is regulated by state forest rules. Buy from licensed depots, keep the bills and ask the local forest office what applies.
  • Fire and dust. Sawdust and varnish catch fire. Ask your local office about safety rules for a workshop.

What goes wrong?

  • Wrong measurement. A wardrobe cut half an inch too wide for the niche is a loss of a full board.
  • Cheap board in a wet place. A kitchen cabinet or bathroom shelf swells with moisture, and the customer calls you after the first monsoon.
  • Hardware fails. Cheap channels and hinges sag in a year, and the customer blames the carpenter.
  • Customer changes the design midway. You have cut the boards, and the new design needs new ones.
  • A cut finger. Table saws and routers cause serious injury, so guards, push sticks and focus matter.
  • Delayed payment. The customer says they will pay after the work is complete, and then they delay.

Situations you will face

What would you do? Each choice costs something.

Getting started

🪚 Learn under a master first

A workshop owner offers a helper's job at ₹9,000 a month for a year. Your own tools would let you take small jobs now.

  • Work under the master: Low pay, steady learning
  • Start with small jobs now: More money, more mistakes
🔨 Buy a router or keep hand tools

A router costs ₹9,000 and gives clean grooves and edges. Hand tools cost nothing now and take longer.

  • Buy a router: Costs, cleaner finish
  • Use hand tools only: Saves money, slower work
📏 A guide for straight cuts

A saw guide costs ₹2,500. Without one your long cuts on plywood drift a few millimetres.

  • Buy the guide rail: Costs, straight cuts
  • Use a straight board: Free, takes time
📸 Free work for photos

A friend offers a free wardrobe job if you let them post photos. Materials will cost you ₹12,000.

  • Do it and photograph it: Costs, strong portfolio
  • Charge for materials only: Less cost, no photo rights
📝 A customer wants a verbal price

A flat owner asks for the price of a wardrobe on the phone. You have not measured the wall.

  • Visit and write an estimate: Takes a trip, avoids disputes
  • Give a price over the phone: Quick, risk of loss
🪵 Which plywood supplier

A trusted supplier sells branded plywood at a higher rate. A cheaper trader sells unbranded boards that you cannot check.

  • Buy branded plywood: Costs more, reliable boards
  • Buy the cheaper boards: Saves cash, risk of swelling
😷 Dust and noise protection

A mask, ear plugs and glasses cost ₹1,500 per person. Your helper says nobody uses them.

  • Buy for the whole team: Costs, safer work
  • Buy masks only: Cheaper, noise stays
📊 Charge by square foot or by job

Customers compare rates per square foot. Your costs change a lot with board type and hardware.

  • Quote per job with a breakdown: Clear, takes more writing
  • Quote one rate per square foot: Simple, loses on hard jobs

First month

📐 Panel cut half an inch wide

You cut a wardrobe panel to the niche on the plan. The real wall is half an inch narrower.

  • Recut the panel: Costs a board, clean fit
  • Force it and fill the gap: Saves board, visible gap
💰 A customer will not pay an advance

A new customer wants you to buy materials first and be paid when the job ends.

  • Insist on half upfront: May lose the job
  • Buy the materials yourself: Risk of late payment
🔄 The customer changes the design midway

After you cut the boards, the customer asks for sliding doors instead of hinged ones.

  • Charge for the extra work: Fair, may annoy
  • Absorb the change: Customer happy, you lose time
🚿 A kitchen job near the sink

A customer wants cheap board cabinets under the sink. Moisture will swell the board in a year.

  • Use moisture-resistant boards: Costs more, lasts
  • Use cheaper board with sealing: Saves cash, risk of swelling
🚪 A door frame out of square

The wall opening is not square. A perfect door will still stick in some seasons.

  • Reset the frame properly: Takes time, good fit
  • Trim the door to fit: Quicker, gaps appear

Running it

🎨 An interior designer sends you work

A designer offers regular wardrobe work, but wants a 10% commission for each job.

  • Accept the commission: Steady work, lower margin
  • Offer 5% and prompt delivery: May lose some, keep margin
📈 Plywood prices go up 12%

Your supplier raises board prices. Customers who got estimates a week ago expect the old price.

  • Honour the old estimates: Lose margin, keep trust
  • Charge the difference: Cover costs, annoy customers
🔩 Cheap channels or branded ones

Branded drawer channels cost more. Cheap ones sag in a year, and customers blame the carpenter.

  • Use branded hardware: Costs, fewer complaints
  • Use cheaper hardware: Saves cash, callbacks later
🎊 A wedding order with a short deadline

A family wants a bed and two cupboards in twelve days, before a wedding.

  • Take it with overtime: Costs wages, big order
  • Decline politely: No stress, lose income
⚙️ Buy a table saw

A table saw costs ₹38,000 but gives exact cuts and faster production. Your site work is growing.

  • Buy a table saw: Costs, faster and exact
  • Rent a cutting service: Per-cut cost, no machine
🏃 Your best carpenter wants to leave

They have an offer for ₹4,000 more at a competitor and know all your site standards.

  • Match the offer: Costs, keeps skill
  • Let them go, train another: Saves cash, slows work
✨ Offer a PU polish finish

A PU finish costs more but protects surfaces. Many customers do not know the difference.

  • Offer PU as a paid option: Costs materials, higher bill
  • Use ordinary polish only: Cheaper, lower price

When things go wrong

🩹 A helper cuts a finger

The helper's hand slipped near the circular saw. The cut needs stitches.

  • Pay, add guards, push sticks: Costs, safer shop
  • Pay and pause the circular saw: Cheaper, work slows
🌧️ Doors swell after the first rains

Two of your new doors stick after the first heavy rain. The customer is cross.

  • Plane the doors, seal edges free: Costs time, trust kept
  • Charge for the repair: No cost, customer annoyed
⏳ A customer delays final payment

A customer says they will pay later, after the wardrobe is fixed. You have wages due on the 1st.

  • Keep going back politely: Free, wages tight
  • Hold the doors until paid: Hard line, may lose referrals
🔒 Boards stolen from the site

A pile of plywood stored on a building site is stolen overnight.

  • Replace at your cost: Heavy cost, project stays on
  • Pause until owner shares cost: Delay, customer upset
🔥 Sawdust catches a small fire

A spark from a grinder lit sawdust in the workshop. The fire was put out, but a corner is scorched.

  • Fit extinguishers and clear dust daily: Costs, safer shop
  • Stop sawing until it is safe: Lose days, nobody at risk

Growing

🏭 Move to a larger workshop

A bigger shed with three-phase power costs ₹22,000 a month and a bigger deposit.

  • Rent the bigger shed: Costs, larger orders
  • Stay in your small workshop: Saves cash, limits orders
🍳 Offer complete kitchens

A kitchen is a big job with plumbing and electrical coordination. A partner plumber is available.

  • Offer kitchens with a partner: Higher income, more risk
  • Make cabinets only: Smaller jobs, lower risk
🪵 An edge banding machine

An edge bander costs ₹55,000 and makes every board edge clean, but you need steady volume.

  • Buy it: Costs, cleaner finish
  • Do edging by hand: Cheaper, slower
🏗️ A builder wants fifty doors

A builder offers fifty doors with frames at a fixed price. It is a big order, but margin is thin.

  • Take it with a deposit: Big volume, thin margin
  • Quote a higher price: May lose it, better margin
🧑‍🔧 Take on an apprentice

A young person wants to learn. They will cost wages and wastage for six months before they help.

  • Take the apprentice: Costs, future skilled hand
  • Hire only trained carpenters: Costs more per hand, faster work

Is it right for you?

Carpentry suits you if you like making things with your hands, enjoy getting a measurement exactly right, and can deal with customers who change their minds. It suits you less if you cannot take advances and say no to unclear work, or if you dislike dust, noise and long hours standing.

A good test: build one piece of furniture, such as a simple shelf or bedside table, from a cut list you made yourself, and show it to someone who has no reason to flatter you. If the joints are tight and the finish is clean, you are ready to take small orders.

Carpentry & woodwork service business in India
Carpentry & woodwork service business in India

Practise running a business for free

This business is not in the game yet. Try a similar one with real rent, staff, stock and loans before you invest your money.

Play: Mobile repair shop →

Frequently asked questions

How much does it cost to start a carpenter business in India?

About ₹70,000–1.4 lakh to work on customers' sites with power tools and a helper, and about ₹1.7–3.1 lakh for a small rented workshop with a table saw and planer. Tool and timber prices vary by city, so check locally before you buy.

What work earns the most for a carpenter?

Wardrobes, modular-style kitchens, doors and made-to-order furniture pay most per job but need accurate measuring and finishing. Repairs and small jobs bring regular cash and customers who recommend you for the big jobs.

Should I work on site or from a workshop?

Site work needs less money, and many customers like to see the work done at home. A workshop lets you cut accurately, work in all weather and take bigger orders, but it brings rent, power and machine costs.

Which wood or board should I use?

It depends on the job and budget. Plywood grades, MDF, block board and solid wood have different prices and strengths. Kitchens and bathrooms need moisture-resistant boards. Tell the customer what you use and why, and put it in writing.

Do I need a licence for a carpentry workshop?

Usually shop or trade registration and a GST decision with a CA. A workshop with machines may need a commercial electricity connection and local permission. For solid timber, buy from licensed depots with bills, since timber movement has state forest rules.